MC68HC705JJ7CDW
数据手册.pdfIC MCU 8Bit 6KB OTP 20SOIC
General Description
Introduction
The MC68HC705JJ7 and MC68HC705JP7 are erasable programmable read-only memory EPROM versions of the MC68HC05JJ/JP Family of microcontrollers MCU.
Features
Features of the two parts include:
• Low-cost, M68HC05 core MCU in 20-pin package MC68HC705JJ7 or 28-pin package MC68HC705JP7
• 6160 bytes of user EPROM, including 16 bytes of user vectors
• 224 bytes of low-power user random-access memory RAM
• 64 bits of personality EPROM serial access
• 16-bit programmable timer with input capture and output compare
• 15-stage core timer, including 8-bit free-running counter and 4-stage selectable real-time interrupt generator
• Simple serial input/output port SIOP with interrupt capability
• Two voltage comparators, one of which can be combined with the 16-bit programmable timer to create a 4-channel, single-slope analog-to-digital A/D converter
• Output of voltage comparator can drive port pin PB4 directly under software control
• 14 input/output I/O lines MC68HC705JJ7 or 22 I/O lines MC68HC705JP7, including high-source/sink current capability on 6 I/O pins MC68HC705JJ7 or 14 I/O pins MC68HC705JP7
• Programmable 8-bit mask option register MOR to select mask options found in read-only memory ROM based versions
• MOR selectable software programmable pulldowns on all I/O pins and keyboard scan interrupt on four I/O pins
• Software mask and request bit for IRQ interrupt with MOR selectable sensitivity on IRQ interrupt edge- and level-sensitive or edge-only
• On-chip oscillator with device option of crystal/ceramic resonator or resistor-capacitor RC operation and MOR selectable shunt resistor, 2 MΩ by design
• Internal oscillator for lower-power operation, approximately 100 kHz 500 kHz selected as device option
• EPROM security bit1 to aid in locking out access to programmable EPROM array
• MOR selectable computer operating properly COP watchdog system
• Power-saving stop and wait mode instructions MOR selectable STOP conversion to halt and option for fast 16-cycle restart and power-on reset
• On-chip temperature measurement diode
• MOR selectable reset module to reset central processor unit CPU in low-voltage conditions
• Illegal address reset
• Internal steering diode and pullup device on RESET pin to VDD