MAX1910EUB+
数据手册.pdfLED驱动器, 电荷泵, 1输出, 2.7 V至5.3 V输入, 750 kHz, 5 V/120 mA输出, µMAX-10
The from Products is a 1.5x/2x high-efficiency white LED charge pump in 10 pin µMAX package. This is power LED with a regulated output voltage or current up to 120mA from an unregulated input supply 2.7V to 5.3V. It is complete DC-DC converter requiring only 4 small ceramic capacitors and no inductors. Input ripple is minimized by a unique regulation scheme that maintains a fixed 750KHz switching frequency over a wide load range. Also included are logic-level shutdown and soft-start to reduce input current surges at start-up. It has two automatically selected operating modes such as 1.5x and 2x. 1.5x mode improves efficiency at higher input voltages while 2x mode maintains regulation at lower input voltages. Typical applications include white LED backlighting, cellular phones, PDAs, digital still cameras, MP3 Players and backup-battery boost converters.
- .
- High-efficiency 1.5x/2x charge pumps, low input ripple with 750KHz operation
- .
- Operating temperature range from -40°C to 85°C
- .
- 200mV current-sense threshold reduces power loss
- .
- Current or voltage regulated charge pump
- .
- Up to 120mA output current
- .
- No inductors required
- .
- Small ceramic capacitors
- .
- Regulated ±5% LED current
- .
- Load disconnected in shutdown
- .
- 1µA shutdown current
- .
- Backup Battery Boost Converters; Cell Phones; Digital Still Cameras; MP3 Players; PDAs; White LED Backlighting