MC33888FBR2

Power Switch Hi Side 10A Automotive 64Pin PQFP T/R

The 33888 is a single-package combination of a power die with four discrete high-side MOSFETs two 10 mΩ and two 40 mΩ and an integrated IC control die consisting of eight low-side drivers 600 mΩ each with appropriate control, protection, and diagnostic features. Programming, control, and diagnostics are accomplished using a 16-bit SPI interface. Additionally, each high-side output has its own parallel input for pulse-width modulation PWM control if desired. The low sides share a single configurable direct input. The 33888 is available in two power packages.

Features

Dual 10 mΩ High Side, Dual 40 mΩ High Side, Octal 600 mΩ Low Side

Full Operating Voltage of 6.0 V to 27 V

SPI Control of High-Side Overcurrent Limit, High Side Current Sense, Output OFF Open Load Detection, Output ON/OFF Control, Watchdog Timeout

SPI Reporting of Program Status and Fault

High-Side Analog Current Feedback with Selectable Ratio

Enhanced 16 V Reverse Polarity VPWR Protection