MAX8566ETJ+

高效率， 10A ， PWM内置开关降压稳压器 High-Efficiency, 10A, PWM Internal-Switch Step-Down Regulator

The from Products is a high efficiency, 10A, PWM internal switch step-down regulator in 32 pin TQFN package. This switching regulator delivers up to 10A load current at output voltages from 0.6V to 0.87 x VIN. The total output voltage set error is less than ±1% over load, line and temperature. It operates in pulse width modulation PWM mode with a 250KHz to 2.4MHz switching frequency range that is programmable by an external resistor. It employs a voltage mode control architecture with a high bandwidth > 10MHz error amplifier. The voltage mode control architecture makes switching frequencies greater than 1MHz possible, achieving all ceramic-capacitor designs to minimize PC board space making it ideal for point-of-load applications. Typical applications include ASIC/CPU/DSP core voltages, POL power supplies, DDR power supplies, base-station power supplies, fibre power supplies, telecom power supplies and network power supplies.

.

Operates from 2.3V to 3.6V input supply

.

Operating temperature range from -40°C to 85°C

.

Internal 8mohm on-resistance MOSFETs

.

10A output PWM step-down regulator

.

Adjustable output from 0.6V to 0.87 x VIN

.

Allows all ceramic capacitor design, output tracking or sequencing

.

SYNCOUT drives 2nd regulator 180° out-of-phase

.

Prebiased or monotonic soft-start, power-good output

.

Programmable soft-start time, sourcing and sinking output current

.

REFIN for DDR termination application