MAX4092AUA+

MAXIM INTEGRATED PRODUCTS  MAX4092AUA+  运算放大器, 轨至轨输出, 500 kHz, 2个放大器, 0.2 V/µs, ± 1.35V至± 3V, 2.7V至6V, µMAX, 8 引脚

The is a dual, micropower, single supply, rail to rail op-amp in 8 pin µMAX package. The operational amplifier combines excellent DC accuracy with rail to rail operation at the input and output. Since the common mode voltage extends from VCC to VEE, the device can operate from either a single 2.7V to 6V supply or split supplies ±1.35V to ±3V. Each op-amp requires less than 130µA of supply current. Even with the low current, the op-amps are capable of driving a 1Kohm load and the input referred voltage noise is only 12nV/√Hz. In addition, these op-amps can drive loads in excess of 2000pF. The precision performance of the MAX4092 combined with their wide input and output dynamic range, low voltage, single supply operation and low supply current make it an ideal choice for battery operated equipment, industrial and data acquisition and control applications.

.

Beyond the rails inputs

.

Operating temperature range from -40°C to 125°C

.

No phase reversal for overdriven inputs

.

Offset voltage is 30µV

.

Maximum quiescent current per op-amp is 165µA

.

Gain bandwidth product is 500KHz

.

High voltage gain is 115dB

.

High common mode rejection ratio is 90dB and power supply rejection ratio is 100dB