MCP25025T-I/SL
数据手册.pdf接口-I/O扩展器 Digital 1 Wire capab
Description
The MCP2502X/5X devices operate as I/O expanders for a Controller Area Network CAN system, supporting CAN V2.0B active, with bus rates up to 1 Mb/s. The MCP2502X/5X allows a simple CAN node to be implemented without the need for a microcontroller.
Features
• Implements CAN V2.0B
\- Programmable bit rate up to 1 Mb/s
\- One programmable mask
\- Two programmable filters
\- Three auto-transmit buffers
\- Two message reception buffers
\- Does not require synchronization or configuration messages
• Hardware Features
\- Non-volatile memory for user configuration
\- User configuration automatically loaded on power-up
\- Eight general-purpose I/O lines individually selectable as inputs or outputs
\- Individually selectable transmit-on-pin change for each input
\- Four 10-bit, analog input channels with programmable conversion clock and VREF sources MCP2505X devices only
\- Message scheduling capability
\- Two 10-bit PWM outputs with independently programmable frequencies
\- Device configuration can be modified via CAN bus messages
\- In-Circuit Serial Programming™ ICSP™ of default configuration memory
\- Optional 1-wire CAN bus operation
• Low-power CMOS technology
\- Operates from 2.7V to 5.5V
\- 10 mA active current, typical
\- 30 µA standby current CAN Sleep mode
• 14-pin PDIP 300 mil and SOIC 150 mil packages
• Available temperature ranges:
\- Industrial I: -40°C to +85°C
\- Extended E: -40°C to +125°C
