MAX3656ETG+T

MAXIM INTEGRATED PRODUCTS  MAX3656ETG+T  芯片, 激光二极管驱动器

The is a 155Mbps to 2.5Gbps burst mode laser driver in 24 pin TQFN package. The laser driver accepts either positive referenced emitter coupled logic PECL or current mode logic CML data inputs and provides bias and modulation current for the laser diode. The device can switch laser diode from a completely dark off condition to a full on condition with proper bias and modulation currents in less than 2ns. The MAX3656 incorporates DC coupling between laser driver and laser diode and operates with a single supply voltage as low as +3V. A digital automatic power control APC loop is provided to maintain average optical power over full temperature range and lifetime. The APC loop is functional for a minimum burst on-time of 576ns and minimum burst off-time of 96ns with no limit on the maximum burst on- or off-time. It is used in passive optical network PON transmitters, fibre to the-home FTTH and fibre to the-business FTTB broadband access systems.

.

Supply voltage range is 3V to 3.6V

.

Operating temperature range from -40°C to +85°C

.

Burst on-time of 576ns to infinity

.

Infinite bias-current hold time between bursts

.

Typical supply current of 40mA

.

Programmable bias current from 1mA to 70mA

.

Programmable modulation current from 10mA to 85mA

.

Automatic average power control with failure monitor no CAPC capacitor needed

.

APC loop initialization