MK22FN1M0VLL12

NXP  MK22FN1M0VLL12  微控制器, 32位, K2 USB系列, ARM 皮质-M4, 120 MHz, 1 MB, 128 KB, 100 引脚, LQFP

The is a 32-bit Kinetis K2x Microcontroller with USB control, based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 120MHz. The device incorporates 1MB internal flash, 128kB internal RAM, two 16-bit SAR A/D converter, one 12-bit D/A converter and 66 general-purpose I/O pins. This device also features communication interfaces like five UART modules, three SPI modules, three I2C modules and one I2S module.

.

ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz

.

FlexBus external bus interface

.

Multiple low-power modes - low leakage wakeup unit

.

Memory protection unit with multi-master protection

.

16-channel DMA controller

.

External watchdog monitor and software watchdog

.

Hardware CRC module

.

128-bit Unique identification ID number per chip

.

Three analog comparators CMP

.

Voltage reference

.

USB Full-/low-speed On-the-Go controller

.

USB device charger detect

.

Controller area network CAN module

.

Secure digital host controller SDHC

.

Two 8-channel Flex-timers PWM/motor control

.

Two 2-channel Flex-timers PWM/quad decoder

.

Periodic interrupt timers and 16-bit Low-power timer

.

Carrier modulator transmitter

.

Real-time clock

.

Programmable delay block