MCB1343

LPC1343FBD48 Microcontroller Evaluation Board 72MHz CPU 8KB RAM 8KB/32KB EEPROM/Flash

is a Keil MCB1000 evaluation board which enables to create and test working programs based on the NXP LPC1343FBD48 ARM Cortex-M3 processor based device. The NXP LPC1343FBD48 microcontroller provided with the MCB1000 board is a high end Cortex-M device with advanced ADC and serial I/O capabilities. This device include a serial wire debug interface for downloading and debugging. They do not support a JTAG interface. A 12MHz crystal provides the clock signal for the CPU. The Cortex debug connector provides support for serial wire debug feature of the Cortex-M device. The MCB1000 board connects the on chip serial UART to the ST3232 which converts the logic signals to RS232 voltage levels.

.

72MHz LPC1343FBD48 ARM Cortex-M3 processor based MCU in 48 pin LQFP

.

On chip memory of 32KB flash and 8KB RAM

.

External memory 8KB EEPROM accessible via I2C bus

.

Solar power can optionally provide power to the board

.

Temperature digital sensor for monitoring board temperature

.

USB 2.0 full speed interface and USB micro AB connector

.

SPI Port via 20 pin connector

.

42 GPIO pins

.

10 pin Cortex debug interface connector

Do not attach additional power supplies such as batteries while the USB supplies power to the MCB1000. This may harm the PC.