LTC6262HMS8#PBF

运算放大器, 2个放大器, 30 MHz, 7 V/µs, 1.8V 至 5.25V, MSOP, 8 引脚

The from is a 30MHz, 240µA power efficient, rail to rail I/O dual op-amp in 8 pin MSOP package. This single operational amplifier has low noise, low power and low supply voltage. It is unity gain stable with capacitive loads up to 1nF. The device features 30MHz gain bandwidth product, 7V/µs slew rate while consuming only 240µA of supply current per amplifier operating on supply voltages ranging from 1.8V to 5.25V. The combination of low supply current, low supply voltage, high gain bandwidth product and low noise makes the LTC6261 family unique among rail to rail input/output opamp with similar supply current. This operational amplifier is ideal for low power and low noise applications. It can be used as plug-in replacements for many commercially available opamp to reduce power and improve input/output range and performance. The device is typically used in micropower active filters and battery or solar powered systems.

.

Gain bandwidth product of 30MHz, 7V/µs slew rate, low quiescent current of 240µA at VS = 5V

.

245µA supply current per amplifier and 5µA supply current in shutdown at VS = 5V

.

Opamp drives up to 1nF capacitive loads

.

Input offset voltage of 50µV PNP, 50µV NPN & 0.4µV/°C input offset voltage drift at VS = 5V

.

Input bias current of -60nA VCM = V- + 0.3V and 10nA VCM = V+ - 0.3V at VS = 5V

.

Input offset current of 2nA at VCM = V- + 0.3V and 2nA at VCM = V+ - 0.3V at VS = 5V

.

Input noise voltage of 1.25µVp-p at f = 0.1Hz to 10Hz, VS = 5V

.

CMRR of 100dB at VCM = 0.3V to 3.5V and PSRR of 95dB at VCM = 0.4V at VS = 5V

.

560KHz full power bandwidth, 0.0012% total harmonic distortion and noise at VS = 5V

.

Operating temperature range from -40°C to 125°C