LTM8061EV-4.2#PBF
数据手册.pdfLINEAR TECHNOLOGY LTM8061EV-4.2#PBF 芯片, 电池充电器, 4.2V, 77LGA
The is a high-efficiency standalone Li-ion Battery Charger optimized for one and two-cell packs. The LTM8061 provides a constant-current/constant-voltage charge characteristic, with maximum charge current up to 2A. A precondition feature trickle charges a depleted battery and bad battery detection provides a signal and suspends charging if a battery does not respond to preconditioning. It can be configured to terminate charging when charge current falls to one-tenth the programmed maximum current or to use an internal timer if a time based termination scheme is desired. Once charging is terminated, the battery charger enters a low current standby mode. An auto-restart feature starts a new charge cycle if the battery voltage drops 2.5% from the float voltage, or if a new battery is inserted into a charging system.
- .
- Programmable charge current up to 2A
- .
- User-selectable charge termination - C/10 or on board termination timer
- .
- Dynamic charge rate programming/soft-start pin
- .
- Programmable input current limit
- .
- Optional reverse input protection
- .
- NTC resistor temperature monitor
- .
- 0.5% Float voltage accuracy
- .
- Bad-battery detection with auto-reset