锐单电子商城 , 一站式电子元器件采购平台!
  • 电话:400-990-0325

LM22670MR-ADJ

LM22670MR-ADJ

TI 德州仪器 主动器件

TEXAS INSTRUMENTS  LM22670MR-ADJ  直流-直流开关降压逐步递减稳压器, 可调, 4.5V-42V输入, 1.285V-37V输出, 3A输出, SOP-8

The is a SIMPLE SWITCHER® step-down Voltage Regulator provides all of the functions necessary to implement an efficient high voltage step-down buck regulator using a minimum of external components. This easy to use regulator incorporates a 42V N-channel MOSFET switch capable of providing up to 3A of load current. Excellent line and load regulation along with high efficiency >90% are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. The default switching frequency is set at 500kHz allowing for small external components and good transient response. In addition, the frequency can be adjusted over a range of 200kHz to 1MHz with a single external resistor. The internal oscillator can be synchronized to a system clock or to the oscillator of another regulator.

.
Internally compensated voltage mode control
.
Stable with low ESR ceramic capacitors
.
Adjustable switching frequency and synchronization
.
Precision enable pin
.
Integrated boot-strap diode
.
Integrated soft-start
.
Fully WEBENCH® enabled
.
±1.5% Feedback reference accuracy
.
Green product and no Sb/Br
LM22670MR-ADJ中文资料参数规格
技术参数

频率 500 kHz

输出接口数 1

输出电压 1.285V ~ 37V

输出电流 3 A

针脚数 8

开关频率 500 kHz

拓扑结构 Buck

输入电压Max 42 V

输入电压Min 4.5 V

输出电压Max 37 V

输出电压Min 1.285 V

输出电流Max 3 A

工作温度Max 125 ℃

工作温度Min -40 ℃

封装参数

安装方式 Surface Mount

引脚数 8

封装 SOP

外形尺寸

封装 SOP

其他

产品生命周期 Active

包装方式 Cut Tape CT

符合标准

RoHS标准 Non-Compliant

REACH SVHC标准 No SVHC

REACH SVHC版本 2015/06/15

LM22670MR-ADJ引脚图与封装图
LM22670MR-ADJ引脚图

LM22670MR-ADJ引脚图

LM22670MR-ADJ封装图

LM22670MR-ADJ封装图

LM22670MR-ADJ封装焊盘图

LM22670MR-ADJ封装焊盘图

在线购买LM22670MR-ADJ
型号 制造商 描述 购买
LM22670MR-ADJ TI 德州仪器 TEXAS INSTRUMENTS  LM22670MR-ADJ  直流-直流开关降压逐步递减稳压器, 可调, 4.5V-42V输入, 1.285V-37V输出, 3A输出, SOP-8 搜索库存
替代型号LM22670MR-ADJ
图片 型号/品牌/封装 代替类型 描述 替代型号对比

型号: LM22670MR-ADJ

品牌: TI 德州仪器

封装: SOP 1.28V 8Pin

当前型号

TEXAS INSTRUMENTS  LM22670MR-ADJ  直流-直流开关降压逐步递减稳压器, 可调, 4.5V-42V输入, 1.285V-37V输出, 3A输出, SOP-8

当前型号

型号: LM22670MRE-ADJ/NOPB

品牌: 德州仪器

封装: PSOP 1.28V 8Pin

完全替代

TEXAS INSTRUMENTS  LM22670MRE-ADJ/NOPB  直流-直流开关降压逐步递减稳压器, 可调, 4.5V-42V输入, 1.285V-37V输出, 3A输出, SOIC-8

LM22670MR-ADJ和LM22670MRE-ADJ/NOPB的区别

型号: LM22670MR-ADJ/NOPB

品牌: 德州仪器

封装: PSOP 1.28V 8Pin

完全替代

SIMPLE SWITCHER® 降压调节器,LM2267x 和 LM22680 系列宽输入电压范围:4.5V 至 42 V 内部补偿电压模式控制,用于小型材料清单计数 使用低 ESR 陶瓷电容器实现稳定 500kHz 的切换频率,在 200kHz 和 1MHz 之间可调 精密启动引脚 集成升压二极管 集成软启动 完全 WEBENCH® 设计启用 ### 直流/直流开关调节器,Texas Instruments用于高达 75V 的宽电压输入设计,以及易用性和灵活性之间的平衡。

LM22670MR-ADJ和LM22670MR-ADJ/NOPB的区别