LTC6910-1CTS8#TRMPBF
数据手册.pdfLINEAR TECHNOLOGY LTC6910-1CTS8#TRMPBF 可编程/可变增益放大器, 1 放大器, 1个放大器, 11 MHz, -40 °C, 85 °C, 2.7V 至 10.5V
The is a digitally controlled Programmable Gain Amplifier that is easy to use and occupy very little PC board space. The inverting gain is adjustable using a 3-bit digital input to select gains of 0, 1, 2, 5, 10, 20, 50 and 100V/V in the LTC6910-1. The LTC6910-1 is inverting amplifier with rail-to-rail output. When operated with unity gain, they will also process rail-to-rail input signals. A half-supply reference generated internally at the AGND pin supports single power supply applications. Settling time in the CMOS gain-control logic is typically several nanoseconds and faster than the analogue signal path. Electrically clean construction is important in applications seeking the full dynamic range of the LTC6910-1 amplifier. Short, direct wiring will minimize parasitic capacitance and inductance. Analogue data acquisition can exploit band limiting as well as gain to suppress unwanted signals or noise.
- .
- 3-bit digital gain control in three gain-code options
- .
- Rail-to-rail input range
- .
- Rail-to-rail output swing
- .
- Single or dual supply
- .
- Input noise down to 8nV/√Hz
- .
- System dynamic range to 120dB
- .
- 1.5mV Input offset voltage