LT4254IGN#PBF

LINEAR TECHNOLOGY  LT4254IGN#PBF  芯片, 热插拔控制器, 24V, 16TSSOP

The is a high voltage Hot Swap Controller allows a board to be safely inserted and removed from a live backplane. An internal driver controls the high side N-channel MOSFET gate for supply voltages ranging from 10.8 to 36V. The part features an open-circuit detect OPEN output that indicates abnormally low load current conditions. It features an adjustable analog foldback current limit. If the supply remains in current limit for more than a programmable time, the N-channel MOSFET shuts off, the PWRGD output goes low and the LT4254 either automatically restarts after a time-out delay or latches off until the UV pin is cycled low. The RETRY pin sets whether the part will automatically restart after an overcurrent fault or if it will latch off until the UV pin is cycled low. The PWRGD output indicates when the output voltage rises above a programmed level. An external resistor string from VCC provides programmable undervoltage and overvoltage protection.

.

Allows safe board insertion and removal from a live backplane

.

Foldback current limiting

.

Open circuit and overcurrent fault detect

.

Drives an external N-channel MOSFET

.

Automatic retry or latched off operation after overcurrent fault

.

Programmable supply voltage power-up rate

.

Undervoltage and overvoltage protection

.

Open MOSFET detection