FL40/D50/R/RN
数据手册.pdfVisual Signal Indicator, Industrial, Red, Flashing, 24VDC, IP65, 81mm Height
The is a continuously-rated Xenon Strobe with visual alarm. It has flame-retardant ABS plastic enclosure and red flame-retardant polycarbonate plastic lens. All units are supplied separate from the back box for ease of installation. The back box must be mounted with the two cable entries at the top or bottom. The back box should be mounted to a reasonably flat surface or to a standard wiring box, using any of the internal mounting holes. A gasket is supplied, should the surface be uneven or if the unit is to be used in wet conditions. To maintain the integrity of the weather seal, the cable must be fitted using a suitable sealed gland. The installation is completed by fitting the beacon onto the back box by means of the supplied screws.
- .
- Red normal base
- .
- High flash intensity
- .
- 360° Visibility
- .
- Reliable and simple to install
- .
- Complements audible alarm system
- .
- Flush mounting base
- .
- 5-joule Flash energy