DLP-2232MSPF
数据手册.pdfMODULE USB ADAPTER WITH MCU
The combines the same USB interface used in the DLP-2232H and the DLP-1232H modules with a Texas Instruments microcontroller with internal FRAM to form a rapid development tool. The MSP430FR5739 microcontroller is preprogrammed with basic functionality for accessing the port pins and can be reprogrammed with user firmware via a 12-pin header using the MSP-FET430UIF device programmer/debugger purchased separately.
**Features:**
* The DLP-2232MSPF module utilizes a Texas Instruments 16-bit RISC architecture processor with 16K bytes FRAM, 1K bytes RAM and a multi-channel,10-bit A/D converter
\- Up to 24 MHz operation
\- Ultra low power FRAM operates as unified memory and is configurable as code, data or storage memory
\- FRAM write access and code execution at up to 24 MHz
\- FRAM has virtually unlimited write endurance 1014 cycles
\- FRAM is inherently secure and radiation resistant
* The DLP-2232MSPF has 26 digital I/O lines available for interfacing to user electronics via a compact, 40-pin DIP footprint module 12 can be configured as A/D inputs
* Send/receive data over a high-speed USB 2.0 interface to a host computer at 1M baud 921600
* Required 5 V power supply can be taken directly from the USB port or supplied by user electronics
* ““Token I/O” code is preprogrammed into the MSP430FR5739’s FRAM memory for basic port pin input/output capability including access to the A/D converter
* The FRAM memory can be easily erased and reprogrammed utilizing a user-supplied compatible programmer or a user-supplied internal bootstrap loader through UART UCA0