AAT3176AIDH-T1
数据手册.pdfIC LED DRIVER RGLTR 500mA 10TDFN
The AAT3176 is a high output current, high efficiency, low noise, low profile charge pump converter IC, ideal for multi-function LED photo-flash applications where solution cost, size, and efficiency are critical. The charge pump is capable of delivering up to 500mA of output current and can be easily programmed in 16 steps with a single GPIO output through AnalogicTech"s S²Cwire™ Simple Serial Control interface. This allows smooth transitions and flexible adjustment of brightness in flash or other lighting modes. Operating at a fast 1MHz switching frequency, the dual-mode 1x/2x operation of the internal charge pump offers excellent power efficiency for both flash and movie modes and combined with a low external parts count one 1µF flying capacitors and small bypass capacitors at V IN and OUT, the AAT3176 is ideally suited for small, battery-powered applications. The maximum current for both Flash and Movie mode is set by two independent external resistors. The MODE pin is adopted to select the LED current between Movie Torch and Flash mode. The AAT3176 has a thermal management system to protect the device in the event of short-circuit, open-circuit, and over-temperature condition. Built-in soft-start circuitry prevents excessive in-rush current during startup. The shutdown feature disconnects the load from V IN and reduces quiescent current to less than 1.0µA. The AAT3176 is available in the 2.2 x 2.2mm Pb-free 10-pin TDFN package.