ADCMP573BCPZ-RL7

超快3.3 V / 5 V单电源比较器的SiGe Ultrafast 3.3 V/5 V Single-Supply SiGe Comparators

Product Details

The ADCMP572 and ADCMP573 are ultrafast comparators fabricated on Analog Devices’ proprietary XFCB3 Silicon Germanium SiGe bipolar process. The ADCMP572 features CML output drivers and latch inputs, and the ADCMP573 features reduced swing PECL RSPECL output drivers and latch inputs.

Both devices offer 150 ps propagation delay and 80 ps minimum pulse width for 10 Gbps operation with 200 fs rms random jitter RJ. Overdrive and slew rate dispersion are typically less than 15 ps.

A flexible power supply scheme allows both devices to operate with a single 3.3 V positive supply and a −0.2 V to +1.2 V input signal range or with split input/output supplies to support a wider −0.2 V to +3.2 V input signal range and an independent range of output levels. 50 Ω on-chip termination resistors are provided at both inputs with the optional capability to be left open on an individual pin basis for applications requiring high impedance inputs.

The CML output stage is designed to directly drive 400 mV into 50 Ω transmission lines terminated to between 3.3 V to 5.2 V. The RSPECL output stage is designed to drive 400 mV into 50 Ω terminated to VCCO − 2 V and is compatible with several commonly used PECL logic families. The comparator input stage offers robust protection against large input overdrive, and the outputs do not phase reverse when the valid input signal range is exceeded. High speed latch and programmable hysteresis features are also provided.

The ADCMP572 and ADCMP573 are available in a 16-lead LFCSP package and have been characterized over an extended industrial temperature range of −40°C to +125°C.

### Features and Benefits

.

3.3 V/5.2 V single-supply operation

.

150 ps propagation delay

.

15 ps overdrive and slew rate dispersion

.

8 GHz equivalent input rise time bandwidth

.

80 ps minimum pulse width

.

35 ps typical output rise/fall

.

10 ps deterministic jitter DJ

.

200 fs random jitter RJ

.

On-chip terminations at both input pins

.

Robust inputs with no output phase reversal

.

Resistor-programmable hysteresis

.

Differential latch control

.

Extended industrial −40°C to +125°C temperature range