ADA4930-1YCPZ-R2
数据手册.pdf对于低电压ADC的超低噪声驱动器 Ultralow Noise Drivers for Low Voltage ADCs
Product Details
The ADA4930-1/ADA4930-2 are very low noise, low distortion, high speed differential amplifiers. They are an ideal choice for driving 1.8 V high performance ADCs with resolutions up to 14 bits from dc to 70 MHz. The adjustable output common mode allows the ADA4930-1/ADA4930-2 to match the input of the ADC. The internal common-mode feedback loop provides exceptional output balance, suppression of even-order harmonic distortion products, and dc level translation.
With the ADA4930-1/ADA4930-2, differential gain configurations are easily realized with a simple external feedback network of four resistors determining the closed-loop gain of the amplifier.
The ADA4930-1/ADA4930-2 are fabricated using Analog Devices, Inc., proprietary silicon-germanium SiGe, complementary bipolar process, enabling them to achieve very low levels of distortion with an input voltage noise of only 1.2 nV/√Hz.
The low dc offset and excellent dynamic performance of the ADA4930-1/ADA4930-2 make them well suited for a wide variety of data acquisition and signal processing applications.
The ADA4930-1 is available in a Pb-free, 3 mm × 3 mm 16-lead LFCSP, and the ADA4930-2 is available in a Pb-free, 4 mm × 4 mm 24-lead LFCSP. The pinout has been optimized to facilitate printed circuit board PCB layout and minimize distortion. The ADA4930-1 is specified to operate over the −40°C to +105°C temperature range, and the ADA4930-2 is specified to operate over the −40°C to +105°C temperature range for 3.3 V or 5 V supply voltages.
**Applications**
- .
- ADC drivers
- .
- Single-ended-to-differential converters
- .
- IF and baseband gain blocks
- .
- Differential buffers
- .
- Line drivers
### Features and Benefits
- .
- Low input voltage noise: 1.2 nV/√Hz
- .
- Low common-mode output: 0.9 V on single supply
- .
- Extremely low harmonic distortion
- .
- −104 dBc HD2 at 10 MHz
- .
- −79 dBc HD2 at 70 MHz
- .
- −73 dBc HD2 at 100 MHz
- .
- −101 dBc HD3 at 10 MHz
- .
- −82 dBc HD3 at 70 MHz
- .
- −75 dBc HD3 at 100 MHz
- .
- See data sheet for additional features
**ADA4930-1-EP supports defense and aerospace applications AQEC standard**
- .
- Download ADA4930-1-EP data sheet pdf
- .
- Extended temperature range: −55°C to +105°C
- .
- Controlled manufacturing baseline
- .
- One assembly/test site
- .
- One fabrication site
- .
- Enhanced product change notification
- .
- Qualification data available on request
- .
- V62/13615 DSCC drawing number