ADCMP564BRQ

双路高速ECL比较器 Dual High Speed ECL Comparators

Product Details

The ADCMP563/ADCMP564 are high speed comparators fabricated on Analog Devices’ proprietary XFCB process. The devices feature a 700 ps propagation delay with less than 75 ps overdrive dispersion. Dispersion, a measure of the difference in propagation delay under differing overdrive conditions, is a particularly important characteristic of high speed comparators. A separate programmable hysteresis pin is available on the ADCMP564.

A differential input stage permits consistent propagation delay with a wide variety of signals in the common-mode range from −2.0 V to +3.0 V. Outputs are complementary digital signals that are fully compatible with ECL 10 K and 10 KH logic families. The outputs provide sufficient drive current to directly drive transmission lines terminated in 50 Ω to −2 V. A latch input, which is included, permits tracking, track-and-hold, or sample-and-hold modes of operation. The latch input pins contain internal pull-ups that set the latch in tracking mode when left open.

The ADCMP563/ADCMP564 are specified over the industrial temperature range −40°C to +85°C.

Applications

.

Automatic test equipment

.

High speed instrumentation

.

Scope and logic analyzer front ends

.

Window comparators

.

High speed line receivers

.

Threshold detection

.

Peak detection

.

High speed triggers

.

Patient diagnostics

.

Hand-held test instruments

.

Zero crossing detectors

.

Line receivers and signal restoration

.

Clock drivers

### Features and Benefits

.

Differential ECL-compatible outputs

.

700 ps propagation delay input to output

.

75 ps propagation delay dispersion

.

Input common-mode range: –2.0 V to +3.0 V

.

Robust input protection

.

Differential latch control

.

Internal latch pull-up resistors

.

Power supply rejection greater than 85 dB

.

700 ps minimum pulse width

.

1.5 GHz equivalent input rise time bandwidth

.

Typical output rise/fall time of 500 ps

.

ESD protection > 4kV HBM, >200V MM

.

Programmable hysteresis