AD7923SRU-EP
数据手册.pdfAnalog to Digital Converters - ADC 4CH 200KSPS 12Bit W/ Sequencer
Product Details
The AD7923 is a 12-bit, high speed, low power, 4-channel, successive-approximation SAR ADC. It operates from a single 2.7 V to 5.25 V power supply and features throughput rates up to 200 kSPS. It contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 8 MHz.
The conversion process and data acquisition are controlled by CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS and conversion is also initiated at this point.
The AD7923 uses advanced design techniques to achieve very low power dissipation at maximum throughput rates. At maximum throughput rates, it consumes 1.2 mA maximum with 3 V supplies and 1.5 mA maximum with 5 V supplies.
Through the configuration of the control register, the analog input range can be selected as 0 V to REFIN or 0 V to 2 × REFIN, with either straight binary or twos complement output coding. The AD7923 features four single-ended analog inputs with a channel sequencer to allow a preprogrammed selection of channels to be converted sequentially.
The conversion time for the AD7923 is determined by the serial clock, SCLK, frequency, since this is used as the master clock to control the conversion. The conversion time can be as short as 800 ns with a 20 MHz SCLK.
### Features and Benefits
- .
- Fast throughput rate: 200 kSPS
- .
- Specified for AVDD of 2.7 V to 5.25 V
- .
- Low power
- .
- 3.6 mW max at 200 kSPS with 3 V supply
- .
- 7.5 mW max at 200 kSPS with 5 V supply
- .
- 4 single-ended inputs with sequencer
- .
- Wide input bandwidth
- .
- 70 dB Min SNR at 50 kHz input frequency
- .
- Flexible power/serial clock speed management
- .
- No pipeline delays
- .
- Qualified for automotive applications
- .
- See data sheet for additional features
**AD7923-EP supports defense and aerospace applications AQEC standard**
- .
- Download AD7923-EP data sheet pdf
- .
- Military temperature range
−55°C to +125°C
- .
- Controlled manufacturing baseline
- .
- One assembly/test site
- .
- One fabrication site
- .
- Enhanced product change notification
- .
- Qualification data available on request
- .
- V62/12647 DSCC Drawing Number
