AD5668BCPZ-1500RL7

ANALOG DEVICES  AD5668BCPZ-1500RL7  数模转换器, 八路, 16 bit, 95 kSPS, 串行, 2.7V 至 3.6V, LFCSP, 16 引脚

16 位 8 16-LFCSP-WQ（4x4）

得捷:
IC DAC 16BIT V-OUT 16LFCSP

立创商城:
AD5668BCPZ-1500RL7

艾睿:
By using Analog Devices&s; AD5668BCPZ-1500RL7 DAC converter, you can easily translate a digital stream of pulses into a variable analog signal. This device&s;s digital interface is serial 3-wire, spi, qspi, microwire. This device is based on Resistor-String architecture. It has a voltage output. This DAC has a resolution of 16bit. This DAC has a minimum operating temperature of -40 °C and a maximum of 105 °C. This product will be shipped in tape and reel packaging for quick mounting and safe delivery. This device uses a single power supply.

安富利:
The AD5628/AD5648/AD5668 devices are low power, octal, 12-/14-/16-bit, buffered voltage-output DACs. All devices operate from a single 2.7 V to 5.5 V supply and are guaranteed monotonic by design. The AD5668 and AD5628 are available in both a 4 mm × 4 mm LFCSP and a 16-lead TSSOP, while the AD5648 is available in both a 14-lead and 16-lead TSSOP. The AD5628/AD5648/AD5668 have an on-chip reference with an internal gain of 2. The AD5628-1/AD5648-1/AD5668-1 have a 1.25 V 5 ppm/°C reference, giving a full-scale output range of 2.5 V; the AD5628-2/AD5648-2/AD5668-2 and AD5668-3 have a 2.5 V 5 ppm/°C reference, giving a full-scale output range of 5 V. The on-board reference is off at power-up, allowing the use of an external reference. The internal reference is enabled via a software write. The part incorporates a power-on reset circuit that ensures that the DAC output powers up to 0 V AD5628-1/AD5648-1/AD5668-1, AD5628-2/AD5648-2/AD5668-2 or midscale AD5668-3 and remains powered up at this level until a valid write takes place. The part contains a power-down feature that reduces the current consumption of the device to 400 nA at 5 V and provides software selectable output loads while in power-down mode for any or all DAC channels. The outputs of all DACs can be updated simultaneously using the LDAC function, with the added functionality of user-selectable DAC channels to simultaneously update. There is also an asynchronous CLR that updates all DACs to a userprogrammable code—zero scale, midscale, or full scale. The AD5628/AD5648/AD5668 utilize a versatile 3-wire serial interface that operates at clock rates of up to 50 MHz and is compatible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards. The on-chip precision output amplifier enables rail-to-rail output swing

Verical:
DAC 8-CH Resistor-String 16-bit 16-Pin LFCSP EP T/R

罗切斯特:
DAC 8-CH Resistor-String 16-bit 16-Pin LFCSP EP T/R

DeviceMart:
IC DAC 16BIT OCT 3V 16LFCSP

Win Source:
IC DAC 16BIT OCT 3V 16LFCSP