AD5339ARM
数据手册.pdfANALOG DEVICES AD5339ARM 数模转换器, 双路, 12 bit, 14.8 kSPS, 串行, 2.5V 至 5.5V, SOP, 8 引脚
The is a dual 12-bit buffered voltage output Digital-to-analog Converter DAC operates from a single 2.5 to 5.5V supply, consuming 250µA at 3V. On-chip output amplifiers allow rail-to-rail output swing with a slew rate of 0.7V/µs. A 2- wire serial interface operates at clock rates up to 400kHz. This interface is SMBus compatible at VDD <3.6V. Multiple devices can be placed on the same bus. The outputs of DAC can be updated simultaneously using the software LDAC function. The part incorporates a power-on reset circuit to ensure that the DAC outputs power up to 0V and remain there until a valid write to the device takes place. A software clear function resets all input and DAC registers to 0V. A power-down feature reduces the current consumption of the devices to 200nA at 5V. The low power consumption of these parts in normal operation makes them ideally suited to portable battery-operated equipment.
- .
- Guaranteed monotonic by design over all codes
- .
- Simultaneous update of outputs
- .
- Software clear facility
- .
- Data read-back facility
- .
- On-chip rail-to-rail output buffer amplifiers