AD5620CRM-1

单， 12位/ 14位/ 16位属于nanoDAC用5ppm的/ C片内基准采用SOT -23 Single, 12-/14-/16-Bit nanoDAC with 5 ppm/C On-Chip Reference in SOT-23

12 位 1 8-MSOP

得捷:
IC DAC 12BIT V-OUT 8MSOP

艾睿:
DAC 1-CH Resistor-String 12-bit 8-Pin MSOP Tube

Jameco:
Digital to Analog Converter 1 Channel Resistor-String 12-Bit 8-Pin MSOP

安富利:
The AD5620/AD5640/AD5660, members of the nanoDAC™ family of devices, are low power, single, 12-/14-/16-bit, buffered voltage-out DACs and are guaranteed monotonic by design. The AD5620/AD5640/AD5660-1 parts include an internal, 1.25 V, 5 ppm/°C reference, giving a full-scale output voltage range of 2.5 V. The AD5620/AD5640/AD5660-2-3 parts include an internal, 2.5 V, 5 ppm/°C reference, giving a full-scale output voltage range of 5 V. The reference associated with each part is available at the VREFOUT pin. The parts incorporate a power-on reset circuit to ensure that the DAC output powers up to 0 V AD5620/AD5640/AD5660-1-2 or midscale AD5620-3 and AD5660-3 and remains there until a valid write takes place. The parts contain a power-down feature that reduces the current consumption of the device to 480 nA at 5 V and provides software-selectable output loads while in power-down mode. The power consumption is 2.5 mW at 5 V, reducing to 1 µW in power-down mode. The AD5620/AD5640/AD5660 on-chip precision output amplifier allows rail-to-rail output swing to be achieved. For remote sensing applications, the output amplifier’s inverting input is available to the user. The AD5620/AD5640/AD5660 use a versatile 3-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards.

Chip1Stop:
DAC 1-CH Resistor-String 12-bit 8-Pin MSOP Tube

Verical:
DAC 1-CH Resistor-String 12-bit 8-Pin MSOP Tube

罗切斯特:
Single, 12-Bit NANODAC with 5 PPM PER Degree Celsius On-Chip Reference