ADUM6211ARSZ-RL7

双通道隔离器，集成DC- DC转换器 Dual-Channel Isolators with Integrated DC-to-DC Converters

Product Details

The ADuM6210/ADuM6211/ADuM6212 are dual-channel digital isolators with _iso_Power®, an integrated, isolated DC/DC converter. Based on the Analog Devices, Inc., _i_Coupler® technology, the DC/DC converter provides regulated, isolated power, adjustable between 3.15 V and 5.25 V. Input supply voltages can range from slightly below the required output to significantly higher.

This eliminates the need for a separate, isolated DC/DC converter in low power, isolated designs. The _i_Coupler chip-scale transformer technology is used for isolated logic signals and for the magnetic components of the DC/DC converter. The result is a small form factor, total isolation solution.

The ADuM6210/ADuM6211/ADuM6212 isolators provide two isolated digital data channels and power in a variety of directional configurations and data rates see the Ordering Guide for more information.

_iso_Power uses high frequency switching elements to transfer power through its transformer. Special care must be taken during printed circuit board PCB layout to meet emissions standards. See the AN-0971 Application Note for board layout recommendations.

**Applications**

.

RS-232 transceivers

.

Power supply start-up bias and gate drives

.

Isolated sensor interfaces

.

Industrial PLCs

### Features and Benefits

.

isoPower integrated, isolated DC/DC converter

.

Regulated 3.15 V to 5.25 V output

.

Up to 150 mW output power

.

Dual dc-to-100 Mbps NRZ signal isolation channels

.

Soft start power supply

.

20-lead SSOP package with 5.3 mm creepage

.

Supports SPI up to 15 MHz

.

High temperature operation: 105°C

.

High common-mode transient immunity: >25 kV/μs

.

See data sheet for additional features