A3240LLT

Hall Effect Sensor 25mA Bipolar 5V/9V/12V/15V/18V 4Pin3+Tab SOT-89 Bulk

CHOPPER-STABILIZED, PRECISION HALL-EFFECT SWITCH

The A3240-- Hall-effect switch is an extremely temperature-stable and stress-resistant sensor especially suited for operation over extended temperature ranges to +150°C. Superior high-temperature performance is made possible through dynamic offset cancellation, which reduces the

residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.

The device includes on a single silicon chip a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a short-circuit protected open-collector output to sink up to 25 mA. A south pole of sufficient strength will turn the output on. An on-board regulator permits operation with supply voltages of 4.2 to 24 volts.

The first character of the part number suffix determines the device operating temperature range; suffix ‘E–’ is for -40°C to +85°C and ‘L–’ is -40°C to +150°C. Three package styles provide a magnetically optimized package for most applications. Suffix ‘–LH’ is a modified SOT23W surface-mount package, ‘–LT’ is a miniature SOT89/TO-243AA transistor package for surface-mount applications; while suffix ‘–UA’ is a three-lead ultra-mini-SIP for through-hole mounting.

FEATURES

■  Resistant to Physical Stress

■ Superior Temperature Stability

■ Output Short-Circuit Protection

■ Operation From Unregulated Supply

■ Reverse Battery Protection

■ Solid-State Reliability

■ Small Size