AD7952BSTZ

ANALOG DEVICES  AD7952BSTZ  模数转换器, 14 bit, 1 MSPS, 单, 4.75 V, 5.25 V, LQFP

Product Details

The AD7952 is a 14-bit, charge redistribution, successive approximation register SAR architecture analog-to-digital converter ADC fabricated on Analog Devices, Inc.’s __iCMOS high voltage process. The device is configured through hardware or via a dedicated write-only serial configuration port for input range and operating mode. The AD7952 contains a high speed 14-bit sampling ADC, an internal conversion clock, an internal reference and buffer, error correction circuits, and both serial and parallel system interface ports. A falling edge on CNVST samples the fully differential analog inputs on IN+ and IN−. The AD7952 features four different analog input ranges and three different sampling modes: warp mode for the fastest throughput, normal mode for the fastest asynchronous throughput, and impulse mode where power is scaled with throughput. Operation is specified from −40°C to +85°C.

**Applications**

.

Process controls Medical instruments

.

High speed data acquisition

.

Digital signal processing

.

Instrumentation

.

Spectrum analysis

.

ATE

### Features and Benefits

.

Multiple pins/software-programmable input ranges

+5 V 10 V p-p, +10 V 20 V p-p,

±5 V 20 V p-p, ±10 V 40 V p-p

.

Pins or serial SPI®-compatible input ranges/mode selection

.

Throughput

1 MSPS warp mode

800 kSPS normal mode

670 kSPS impulse mode

.

14-bit resolution with no missing codes

.

INL: ±0.3 LSB typical, ±1 LSB maximum ±61 ppm of FSR

.

_SNR: 85 dB @ 2 kHz_

.

_i_CMOS® process technology

.

5 V internal reference: typical drift 3 ppm/°C; TEMP output

.

No pipeline delay SAR architecture

.

Parallel 14- or 8-bit bus and serial 5 V/3.3 V interface

.

SPI-/QSPI™-/MICROWIRE™-/DSP-compatible

.

Power dissipation

235 mW @ 1 MSPS

10 mW @ 1 kSPS