A1120ELHLX-T

Hall Effect Sensor 25mA Unipolar 3.3V/5V/9V/12V/15V/18V 3Pin SOT-23W T/R

DESCRIPTION

The A1120, A1121, A1122, A1123, and A1125 Hall-effect unipolar switches are extremely temperature-stable and stress-resistant sensor ICs, especially suited for operation over extended temperature ranges to 150°C. Superior high temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.

Each device includes on a single silicon chip a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a short-circuit protected open-drain output to sink up to 25 mA.

An on-board regulator permits operation with supply voltages of 3 to 24 V. The advantage of operating down to 3 V is that the device can be used in 3 V applications or with additional external resistance in series with the supply pin for greater protection against high-voltage transient events.

FEATURES AND BENEFITS

▪ AEC-Q100 automotive qualified

▪ Unipolar switchpoints

▪ Resistant to physical stress

▪ Superior temperature stability

▪ Output short-circuit protection

▪ Operation from unregulated supply

▪ Reverse-battery protection

▪ Solid-state reliability

▪ Small package sizes