AD8421BRZ-R7

3内华达州/ √Hz的低功耗 3 nV/√Hz, Low Power

Product Details

The AD8421 is a low cost, low power, extremely low noise, ultra-low bias current, high speed instrumentation amplifier which is ideally suited for a broad spectrum of signal conditioning and data acquisition applications. This breakthrough product features the highest CMRR available, allowing it to extract low-level signals in the presence of high-frequency common mode noise over a wide temperature range.

The 10 MHz bandwidth, 35 V/µs slew rate, and 0.7 µs settling time to 0.01% G = 1 allow the AD8421 to amplify high-speed signals and excel in applications that require high channel-count multiplexed systems. Even at high gain, the current feedback architecture preserves this performance, for example, at G = 100, the bandwidth is 2 MHz and the settling time is 0.6 µs. The AD8421 has excellent distortion performance, allowing use in demanding applications such as vibration analysis.

The AD8421 delivers industry-leading 3 nV/√Hz input voltage noise and 200 fA/√Hz current noise with only 2 mA quiescent current, making it an ideal choice for measuring low-level signals. For applications with significant source impedance, the AD8421 employs novel process technology and innovative design techniques to provide groundbreaking noise performance limited only by the sensor.

The AD8421 uses a unique input protection method to give it robust inputs while still maintaining very low noise. This input protection allows voltages 40 V from the opposite supply rail without damage.

A single resistor sets gains between 1 and 10,000. The reference pin can be used to apply a precise offset to the output voltage.

The AD8421 performance is specified from −40°C to +85°C and has typical performance curves to 125°C. It is available in MSOP and SOIC packages.

**Applications**

.

Medical instrumentation

.

Precision data acquisition

.

Microphone preamplification

.

Vibration analysis

.

Multiplexed input applications

.

ADC driver

### Features and Benefits

.

Low power

.

2.3 mA maximum supply current

.

Low noise

.

3.2 nV/√Hz maximum input voltage noise at 1 kHz

.

200 fA/√Hz current noise at 1 kHz

.

Excellent ac specifications 

.

10 MHz bandwidth G = 1

.

2 MHz bandwidth G = 100

.

0.6 µs settling time to 0.001% G = 10

.

80 dB CMRR to 20 kHz G = 1

.

35 V/µs slew rate

.

See data sheet for additional features

** AD8421-EP supports defense and aerospace applications AQEC standard**

.

Download AD8421-EP data sheet pdf

.

Military temperature range −55°C to +125°C

.

Controlled manufacturing baseline

.

One assembly/test site

.

One fabrication site

.

Enhanced product change notification

.

Qualification data available on request

.

V62/13625 DSCC Drawing Number