AT89C51CC01CA-SLSUM
数据手册.pdf
ATMEL
爱特美尔
主动器件
ATMEL AT89C51CC01CA-SLSUM 微控制器, 8位, CAN 控制器, AT89C51, 40 MHz, 32 KB, 1 KB, 44 引脚, LCC
The is a CANary™ 8-bit Microcontroller dedicated to CAN network applications. In X2 mode a maximum external clock rate of 20MHz reaches a 300ns cycle time. Besides the full CAN controller T89C51CC01 provides 32kB of flash memory including In-system-programming ISP, 2kB boot flash memory, 2kB EEPROM and 1.2kB RAM.
- .
- 80C51 Core architecture
- .
- Boot code section with independent lock bits
- .
- In-system programming by on-chip boot program CAN, UART and IAP capability
- .
- 14-sources 4-level Interrupts
- .
- Three 16-bit timers/counters
- .
- Full duplex UART compatible 80C51
- .
- Five ports - 32 + 2 digital I/O lines
- .
- Five-channel 16-bit PCA
- .
- Double data pointer
- .
- 21-bit Watchdog timer 7 Programmable bits
- .
- 10-bit resolution Analog-to-digital converter ADC with 8 multiplexed Inputs
- .
- On-chip Emulation logic Enhanced hook system
- .
- Power saving modes - Idle mode, Power-down mode
- .
- Maximum crystal frequency 40MHz in X2 mode
- .
- Fully compliant with CAN Rev2.0A and 2.0B
- .
- Optimized structure for communication management Via SFR
- .
- Time triggered communication
- .
- Autobaud and listening mode
- .
- Programmable automatic reply mode
- .
- 1Mbps Maximum transfer rate at 8MHz crystal frequency in X2 mode
Special attention is paid to the reduction of the electro-magnetic emission of T89C51CC01.