AT93C56B-SSHM-B

ATMEL  AT93C56B-SSHM-B  EEPROM, 2 Kbit, 256 x 8位 / 128 x 16位, 2 MHz, 串行微丝, SOIC, 8 引脚

The is a MICROWIRE-compatible 2kB 3-wire serial Electrically Erasable Programmable Read-Only Memory EEPROM organized as 128 words of 16-bit each when the ORG pin is connected to VCC and 256 words of 8-bit each when the ORG pin is tied to ground. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are essential. The AT93C56B is enabled through the chip select pin CS and accessed via a 3-wire serial interface consisting of data input DI, data output DO and shift clock SK. Upon receiving a read instruction at DI, the address is decoded and the data is clocked out serially on the DO pin. The write cycle is completely self-timed and no separate erase cycle is required before write. The write cycle is only enabled when the part is in the erase/write enable state. When CS is brought high following the initiation of a write cycle, the DO pin outputs the ready/busy status of the part.

.

Low-voltage operation

.

User-selectable internal organization

.

Sequential read operation

.

2MHz Clock rate 5V

.

Self-timed write cycle 5ms maximum

.

High reliability

.

Endurance - 1000000 write cycles

.

Data retention - 100 years