ISL6115CB

配电控制器 Power Distribution Controllers

Power Distribution Controllers

This family of fully featured hot swap power controllers targets applications in the +2.5V to +12V range. The

ISL6115 is for +12V control, the ISL6116 for +5V, the ISL6117 for +3.3V and the ISL6120 for +2.5V control

applications. Each has a hard wired undervoltage UV monitoring and reporting threshold level approximately

80% of the aforementioned voltage.

Features

• HOT SWAP Single Power Distribution Control ISL6115 for +12V, ISL6116 for +5V, ISL6117 for +3.3V and ISL6120 for +2.5V

• Overcurrent Fault Isolation

• Programmable Current Regulation Level

• Programmable Current Regulation Time to Latch-Off

• Rail-to-Rail Common Mode Input Voltage Range ISL6115

• Internal Charge Pump Allows the Use of N-Channel MOSFET for +12V Control ISL6115

• Undervoltage and Overcurrent Latch Indicators

• Adjustable Turn-On Ramp

• Protection During Turn-On

• Two Levels of Overcurrent Detection Provide Fast Response to Varying Fault Conditions

• 1µs Response Time to Dead Short

• Pb-Free Available RoHS Compliant

Applications

• Power Distribution Control

• Hot Plug Components and Circuit