TUSB1310ZAY

TEXAS INSTRUMENTS  TUSB1310ZAY  芯片, USB收发器, 5GBPS, NFBGA175

Introduction

The TUSB1310 is a single port, 5.0-Gbps USB 3.0 physical layer transceiver operating off of a single crystal or an external reference clock. The reference clock frequencies are selectable from 20, 25, 30, and 40 MHz. The TUSB1310 provides a clock to USB link layer controllers. The single reference clock allows the TUSB1310 to provide a cost effective USB 3.0 solution with few external components and a minimum implementation cost.

Features

• Universal Serial Bus USB

– Single Port 5.0-Gbps USB 3.0 Physical Layer Transceiver

• One 5.0-Gbps SuperSpeed Conneciton

• One 480-Mbps HS/FS/LS Connection

– Fully Compliant with USB 3.0 Specification

– Supports 3+ Meters USB 3.0 Cable Length

– Fully Adaptive Equalizer to Optimize Receiver Sensitivity

– PIPE to Link Layer Controller

• Supports 16-Bit SDR Mode at 250 MHz

• Compliant With PHY Interface for the USB Architectures PIPE, Version 3.0

– ULPI to Link Layer Controller

• Supports 8-Bit SDR Mode at 60 MHz

• Supports Synchronous Mode and Low Power Mode

• Compliant with UTMI+ Low Pin Interface ULPI Specification, Revision 1.1

• General Features

– IEEE 1149.1 JTAG Support

– IEEE 1149.6 JTAG support for the SuperSpeed Port

– Operates on a Single Reference Clock Selectable from 20, 25, 30 or 40 MHz

– 3.3-, 1.8-, and 1.1-V Supply Voltages

– 1.8-V PIPE and ULPI I/O

– Available in Lead-Free 175-Ball 12- x 12-nF BGA Package 175ZAY

Applications

• Surveillance Cameras

• Multimedia Handset

• Smartphone

• Digital Still Camera

• Portable Media Player

• Personal Navigation Device

• Audio Dock

• Video IP Phone

• Wireless IP Phone

• Software Defined Radio